Abstract:
The NASA Soil Moisture Active Passive (SMAP) mission has been providing L-band (1.4 GHz) passive microwave brightness temperature (Tb) observations since April 2015. By assimilating the Tb observations into the NASA Catchment land surface model using a spatially distributed ensemble Kalman filter, the NASA Global Modeling and Assimilation Office generates the SMAP Level-4 Soil Moisture (L4_SM) product, which provides global, 3-hourly, 9-km resolution estimates of surface (0-5 cm) and root-zone (0-100 cm) soil moisture with ~2.5-day latency for use in research and applications. The L4_SM product also includes estimates of soil temperature, land surface fluxes, and assimilation diagnostics such as the model forecast and observed Tb values.
The output from the L4_SM system is routinely monitored by the L4_SM team. Such monitoring provides valuable information; instances of unusually large Tb observation-minus-forecast (O-F) residuals can indicate events during which soil moisture conditions are poorly described in the land modeling system. For example, repeated occurrences of very large Tb O-F values in central Australia were traced back to deficiencies in the gauge-based precipitation product used in the land modeling system through L4_SM Version 5; this discovery prompted the use, beginning in Version 6, of satellite- and gauge-based precipitation observations outside of North America.
Recently, a statistical analysis of the Tb O-F residuals revealed systematic errors in the “tau-omega” L-band radiative transfer model that converts the land-model simulated soil moisture and temperature into the forecast Tb prior to the L4_SM analysis. The L4_SM analysis is built on the ensemble Kalman filter and assumes unbiased forecast errors. The presence of systematic Tb forecast errors could thus adversely impact the quality of the analyzed soil moisture.
In this paper, we examine the Tb O-F residuals of the latest Version 7 L4_SM data (Science Version ID Vv7030 and Vv7032). In the L4_SM Version 7 algorithm, key parameters of the L-band radiative transfer model, including soil roughness, scattering albedo, and a (seasonally varying) climatology of vegetation opacity, are obtained from the SMAP Level-2 Radiometer retrieval product (Version 5). Additionally, we also use ground measurements of surface soil moisture and soil temperature from the SMAP core validation sites as in situ reference of soil conditions.
As part of the L4_SM system calibration, the seasonally-varying bias between the model forecast Tb and the observed values is removed prior to the assimilation of the SMAP Tb observations. That is, the L4_SM system is designed to only correct errors in synoptic-scale and interannual variations from the long-term mean seasonal cycle while maintaining the model’s (potentially erroneous) climatology. The Tb O-F residuals examined here are thus computed using SMAP Tb observations after they are rescaled to the mean seasonal cycle of Tb from the modeling system without SMAP data assimilation. Consequently, the long-term average of the Tb O-F residuals has a global mean of only 0.13 K and locally small values, ranging from -1 to 3 K.
Despite the small time-average values of the Tb O-F residuals, the model forecast Tb was nevertheless found to exhibit undesirable systematic errors. At some locations, the time-average Tb O-F values strongly depend on surface soil moisture (SM). At the Yanco SMAP core validation site, for example, the Tb O-F residuals typically range from 5 to 15 K under dry soil moisture conditions (SM < 0.15 m3 m-3) yet are predominantly negative under wet soil moisture conditions (SM > 0.25 m3 m-3), with values ranging from 0 to -40 K. This results in soil moisture analysis increments that persistently make the soil drier under dry SM conditions and persistently make the soil wetter under wet SM conditions, suggesting an error in the dynamic range of the simulated Tb, soil moisture or soil temperature.
In this paper, we describe the higher-order systematic Tb forecast errors in more detail, examine their impact on the L4_SM product quality, and explore potential avenues to further improve the L4_SM algorithm.